FM-2022

FM-2023

FM-2026

FM-2024

FM-2027

FM-2026

FM-2024

FM-2027

FM-2029

FM-2026

FM-2024

FM-2027

Channel 2

Channel 3

Channel 1

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

With built-in

pump

Built-in pump offers

desoldering and hot air

functions!

Vacuum Port

Air Outlet

FM-2024 and FM-2029 cannot

be used at the same time.

Although FM-2024 can be

connected to any channel,

only one FM-2024 unit can be

used at a time.

FM-206 CONFIGURATIONS*

CUSTOMIZE your station for YOUR rework

including FM-2027, FM-2024, FM-2022, FM-2023,

• Graphic User (LCD) Interface for easy setup and operation

• 3 simultaneous powered ports

• Self-contained pump for vacuum and air flow

• Digital airflow indicator

• Configurable display in °C or °F

• Manual or Auto modes

• Low cost composite hot air nozzles

• Capable of hot air rework of 0201, 01005, and up to 10x10mm QFN's.

• Meets or exceeds ANSI J-STD-001

• ESD safe by design

• Auto shutoff w/ sleep function

• Passcode protected

• Security lock to protect against theft/re-location

Auto power shut-off function:

An energy-saving function

that halts power supply

to the heater if the tip is

not used within the set time.

Sleep function:

A function to extend the life of the tip by

reducing its oxidation; the tip temperature

drops automatically when a set amount of time

has elapsed after placing the handpiece on

the iron holder.

If an unused soldering iron is kept supplied with power at a

high temperature, the tip turns black due to oxidation,

repelling solder. This occurs especially when lead-free

solder is used, or when the iron is used without solder in

processes such as correcting bridging. If the tip turns black

due to oxidation, it is recommended to

use HAKKO FT-700. The oxidized tip

can be recovered to an ideal state

simply by plating it with Hakko FS-100

tip polish again and repeating the

removal of oxides using the soft rotating

brush several times.

Topics

A remarkable change with

one simple maintenance

procedure

Blackened oxidized tip

Re-plated tip

HAKKO FT-700

The 60-minute

option has been added

to the FM-206 to meet

customers' requests

FM-206 3-Port Rework Station

The FM-206 rework station's sleek, compact design minimizes

loss of bench space and its powerful ports allow the use of the

FM-2029 single hot air handpiece and FM-2030 heavy duty

soldering iron, making this the ultimate rework station.

Part Number

FM206-DSS

FM206-DTS

FM206-STA

FM206-DSA

Port 1

FM-2024

FM-2024

FM-2027

FM-2024

Port 2

FM-2027

FM-2022

FM-2022

FM-2027

Port 3

FM-2027

FM-2027

FM-2029

FM-2029

*North America only