NXP Semiconductors

UM11144

FRDM-HB2002ESEVM evaluation board

UM11144

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2018. All rights reserved.

User guide

Rev. 1.0 — 13 September 2018

2 / 27

1 Finding kit resources and information on the NXP web site

NXP Semiconductors provides online resources for this evaluation board and its

supported device(s) on http://www.nxp.com.

The information page for FRDM-HB2002ESEVM evaluation board is at http://

www.nxp.com/FRDM-HB2002ESEVM. The information page provides overview

information, documentation, software and tools, parametrics, ordering information and

a

Getting Started tab. The Getting Started tab provides quick-reference information

applicable to using the FRDM-HB2002ESEVM evaluation board, including the

downloadable assets referenced in this document.

1.1 Collaborate in the NXP community

The NXP community is for sharing ideas and tips, ask and answer technical questions,

and receive input on just about any embedded design topic.

The NXP community is at http://community.nxp.com.

2 Getting ready

Working with the FRDM-HB2002ESEVM requires the kit contents, additional hardware

and a Windows PC workstation with installed software.

2.1 Kit contents

• Assembled and tested FRDM-HB2002ESEVM and preprogrammed FRDM-KL25Z

microcontroller board in an anti-static bag

• Quick Start Guide

2.2 Additional hardware

In addition to the kit contents, the following hardware is necessary or beneficial when

working with this kit.

• DC power supply: 5.0 V to 40 V with up to 20 A current handling capability, depending

on motor requirements

• USB standard A (male) to mini-B (male) cable

• 3/16-inch blade screwdriver for connecting the cables

• Typical loads (brushed DC motor, power resistors, or inductive load with up to 5.0 A

and 28 V operation)

• Function generator (optional)

2.3 Windows PC workstation

This evaluation board requires a Windows PC workstation. Meeting these minimum

specifications should produce great results when working with this evaluation board.

• USB-enabled computer with Windows 7, Windows 8, or Windows 10