7

EXTERNAL USE

Step-by-Step Installation Instructions

1

Install Software and Tools

Install CodeWarrior Development

Studio for S12Z 10.6(Eclipse).

2

Connect the USB Cable

Connect one end of the USB cable to the PC and the other end to

the mini-B connector on the DEVKIT-S12ZVL board. Allow the PC

to automatically configure the USB drivers if needed.

3

Using the Example Project

The pre-loaded example project utilizes the RGB LED. Once the

board is plugged in you can see how the RGB LEDs change the

color.

4

Learn More About the S12ZVL

Read the release notes and documentation on the

freescale.com/S12ZVL.

• The Processor Expert graphical initialization software included in

your CodeWarrior installation will help reduce your time to

market

• CodeWarrior for S12Z with examples

In this quick start guide,

you will learn how to set

up the DEVKIT-S12ZVL

board and run the default

exercise.