PRODUCT INFORMATION

UNITRONIC® FD CP (TP) plus

Benefits

Wide temperature range for applications in harsh climatic environments

Decoupling of circuits by means of

twisted-pair (TP) design (crosstalk effects)

UL AWM voltage rating 1000V in case of internal wiring allows for internal laying next to power cables with applied UL rating of

1kV

In the USA inside of industrial machines, per NFPA 79, 2015 Ed., 12.9.2 (condition 3 under 12.9.2: Through 1 mm² and <16

AWG)

Application range

Suitable for use in measuring, control and regulating circuits

Linear robots, automated handling equipment

Drag chain use - in case of horizontal installation travel distances up to 100 m

For use in chain/carrier: Please respect the assembly guidelines listed in Appendix T3

Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)

Product features

Halogen-free, has low capacitance and is flexible down to -40°C

PUR outer sheath, tear and notch-resistant, resistant to mineral oils and abrasion when used in power chains

Low-adhesive surface, resistant to hydrolysis and microbes, oil resistant

Flame retardance: IEC 60332-1-2, VW-1, FT2

Designed for 10 million alternating bending cycles and horizontal travel distances up to 100 meter

Norm references / Approvals

cULus CMX certified by UL (UL: E236660)

cRUus AWM certified by UL (UL: E63634): UL AWM Style 21576 and AWM A/B I/II

Product Make-up

Extra-fine wire strand made of bare copper wires

Core insulation: Based on Polyolefin

TP structure

Non-woven wrapping

Tinned-copper braiding

Outer sheath made of special PUR compound

Outer sheath colour: grey (RAL 7001)

Technical Data

Classification ETIM 5:

ETIM 5.0 Class-ID: EC000104

ETIM 5.0 Class-Description: Control cable

Classification ETIM 6:

ETIM 6.0 Class-ID: EC000104

ETIM 6.0 Class-Description: Control cable

Core identification code:

DIN 47100, refer to Appendix T9

Mutual capacitance:

Up to 0.5 mm²: 60 nF/km

Up to 1.0 mm²: 70 nF/km

Inductivity:

approx. 0.65 mH/km

Conductor stranding:

Stranded, extra-fine wire

From 0.5 mm²: extra-fine wire according to IEC 60228 class 6

Torsion movement in WTG:

TW-0 & TW-2, refer to Appendix T0

Minimum bending radius:

Flexing: 7.5 x outer diameter

Fixed installation: 4 x outer diameter

Last Update (28.03.2019)

2 / 5

©2019 Lapp Group - Technical changes reserved

Product Management www.lappkabel.de

You can find the current technical data in the corresponding data sheet.

PN 0456 / 02_03.16