Surge arrester

B88069X5110T502

2-electrode arrester

EC90XG

PPD AB PD / PPD AB PM

Version: 05 / 2019-07-09

Please read Cautions and warnings and

Page 4 of 6

Important notes at the end of this document.

Soldering parameter

Wave soldering

Wave profile features

Pb-free assembly

Solder

Sn 95.5 / Ag 3.8 / Cu 0.7

Solder bath temperature 263 (±3) °C

Dwell time

< 3 s

Soldering profile applied to a single soldering process.

Cautions and warnings



Do not operate surge arresters in power supply networks, whose maximum operating voltage

exceeds the minimum spark-over voltage of the surge arresters.



Surge arresters may become hot in the event of longer periods of current stress (burn risk). In the

event of overload the connectors may fail or the component may be destroyed.



If the contacts of the surge arresters are defective, current load can cause sparks and loud noises.



Surge arresters must be handled with care and must not be dropped.



Do not continue to use damaged surge arresters.

Display of ordering codes for TDK Electronics products

The ordering code for one and the same product can be represented differently in data sheets, data books,

other publications, on the company website, or in order-related documents such as shipping notes, order

confirmations and product labels. The varying representations of the ordering codes are due to

different processes employed and do not affect the specifications of the respective products.

Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes.