| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PSD501B1 bảng dữ liệu(PDF) 63 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
PSD501B1 bảng dữ liệu(HTML) 63 Page - STMicroelectronics |
|
63 / 153 page ![]() PSD5XX Family 60 APD EN Bit ALE Power ALE Status APD Counter Down Polarity 0 X X Not Counting 1 X Pulsing Not Counting 11 1 Counting (Activates Standby Mode After 15 Clocks) 10 0 Counting (Activates Standby Mode After 15 Clocks) Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 TMR CLK ZPLD ZPLD ZPLD APD ALE PD * RCLK ACLK TURBO CMISER ENABLE Polarity 1 = OFF 1 = OFF 1 = OFF 1 = OFF 1 = ON 1 = ON 1 = HIGH PMMR0 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 * * ** ** Sleep APD CLK Mode 1 = ON 1 = CLKIN PMMR1 Table 17. Power Management Mode Registers (PMMR0, PMMR1) Table 18. APD Counter Operation Power Management Unit (Cont.) Bit 0 * = Should be set to High (1) to operate the APD. Bit 1 0 = ALE Power Down (PD) Polarity Low. 1 = ALE Power Down (PD) Polarity High. Bit 2 0 = Automatic Power Down (APD) Disable. 1 = Automatic Power Down (APD) Enable. Bit 3 0 = EPROM/SRAM CMiser is OFF. 1 = EPROM/SRAM CMiser is ON. Bit 4 0 = ZPLD Turbo is ON. ZPLD is always ON. 1 = ZPLD Turbo is OFF. ZPLD will Power Down when inputs are not changing. Bit 5 0 = ZPLD Clock Input into the Array from the CLKIN pin input is connected. Every Clock change will Power Up the ZPLD when Turbo bit is OFF. 1 = ZPLD Clock Input into the Array from the CLKIN pin input is disconnected. Bit 6 0 = ZPLD Clock Input into the the MacroCell registers from the CLKIN pin input is connected. 1 = ZPLD Clock Input into the the MacroCell registers from the CLKIN pin input is disconnected. Bit 7 0 = In the PSD5XX Clock Input is connected to the Timer. 1 = In the PSD5XX Clock Input is disconnected from the Timer. Bit 0 0 = Automatic Power Down Unit Clock is connected to Port E7 (PE7) alternate function input. 1 = Automatic Power Down Unit Clock is connected to the PSD Clock input (CLKIN). Bit 1 0 = Sleep Mode Disabled. 1 = Sleep Mode Enabled. Bit 2–7 0 = Reserved for future use, should be set to zero. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |