1/5/2021

Type 4X Stainless Steel Junction Box (Eclipse Junior Series) - Hammond Mfg.

https://www.hammfg.com/electrical/products/stainless/ejss

1/2

Additional Inner Panels

Swing Panel Kit

Terminal Kit Assemblies

Padlock Adaptor

Quarter Turn Assemblies

Climate Control

General Accessories

Type 4X Stainless Steel Junction Box Eclipse Junior Series

Continuous Hinge Door with Quarter Turn

Application

Designed for use as instrument enclosures, electric, hydraulic or pneumatic control

housings, electrical junction boxes or terminal wiring enclosures.

Provides protection where equipment may be hosed down or otherwise be very wet, or in

specific applications where corrosion may be a problem.

For high temperature applications, a gasket retainer may be required, please refer to

factory.

Standards

UL 508A Type 3R, 4, 4X, 12, and 13

CSA Type 3R, 4, 4X, 12, and 13

Complies with

NEMA Type 3R, 4, 4X, 12 and 13

IEC 60529, IP66

Construction

Body and cover are formed from 16 guage 304 or 316 stainless steel.

Smooth, continuously welded seams without knockouts, cutouts, or holes.

Formed lip on enclosure to exclude flowing liquids and contaminants.

14 gauge welded brackets provide for enclosure mounting.

Continuously hinged cover has stainless steel hinges and provides 180° opening.

Door latches feature the added safety of quarter turn slot requiring use of tool for opening

Quarter turn latches formed from 316 stainless steel.

Seamless poured-in place gasket.

Models larger than 4"x4" include a removable 14 gauge galvanized inner panel.

Tapped studs are provided for mounting inner panels.

A bonding stud is provided on the door and a grounding stud is provided on the

enclosure.

Grounding and panel mounting hardware provided.

Finish

Cover and enclosure are natural stainless steel with a smooth brushed finish.

Removable inner panel is unpainted galvanized steel.

Accessories

Quality Products. Service Excellence.