UG-1037

EVAL-10MSOPEBZ User Guide

Rev. 0 | Page 6 of 6

ORDERING INFORMATION

BILL OF MATERIALS

Table 2.

Reference Designator

Description

Part Number

Stock Code

C1

0.1 µF, 50 V, X7R, ceramic capacitor

GRM21BR71H104KA01L

FEC 2408531

C2

10 µF, 10 V tantalum capacitor

TAJB106K016RNJ

FEC 498-737

C3 to C32

Harwin subminiature sockets (2)

H3153-01

FEC 2120079

J1 to J4

SMB sockets

1206013

FEC 310-682

J5

2-pin terminal block (5 mm pitch)

KRM 02

FEC 151-785

K1 to K10

Jumper blocks using 3-pin SIP header

M20-9990345 and M7566-05

FEC 512-047 and 150-411

P1 to P4

Harwin subminiature sockets (2)

H3153-01

FEC 2120079

T1 to T10

Test points

20-313137

FEC 240-345

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

LegalTerms and Conditions

By using the evaluationboard discussed herein (together with any tools, components documentation or support materials, the“Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until

you have read and agreed to the Agreement.Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices,

Inc.(“ADI”),withitsprincipal placeof businessat OneTechnologyWay,Norwood, MA 02062,USA. Subject to thetermsand conditionsof theAgreement,ADI hereby grantsto Customer a free,limited,personal,

temporary, non-exclusive, non-sublicensable,non-transferablelicenseto usethe Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit anyThird Party to access the Evaluation Board. As used herein, the term

“Third Party”includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants.The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer

may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written

notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY.THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED“AS IS”AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED,

RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF

INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S

POSSESSION OR USE OFTHE EVALUATION BOARD, INCLUDING BUT NOT LIMITEDTO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’STOTAL LIABILITY FROM ANY AND ALL CAUSES

SHALL BE LIMITEDTOTHE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will

comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of

the Commonwealthof Massachusetts(excluding conflictof law rules). Anylegal actionregardingthisAgreement will beheardinthestateor federal courtshaving jurisdictioninSuffolk County, Massachusetts,

and Customer hereby submits to the personal jurisdiction and venue of such courts.The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is

expressly disclaimed.

©2016 Analog Devices, Inc. All rights reserved. Trademarks and

registered trademarks are the property of their respective owners.

UG14928-0-8/16(0)