6/11/2018

Type 4, 4X Polycarbonate Pushbutton Enclosure (1554 PB Series) - Hammond Mfg.

https://www.hammfg.com/electrical/products/operator/1554pb

1/2

Type 4, 4X Polycarbonate Pushbutton Enclosure 1554 PB Series

Standards

IP66

NEMA 4, 4X, 6, 6P, 12 & 13

UL94 5V

Construction

Electronic instrument enclosures, designed for mounting printed circuit boards or DIN rail

mounted components.

The polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for

outdoor use.

Lid and mounting holes are located outside of the gasket seal.

Lid is secured with self captivating M4 stainless steel machine screws (included),

threaded into integral stainless steel bushings (for repetitive assembly & disassembly).

Heavy duty 16 gauge galvanized steel panels available (see chart)

All stainless steel hardware to avoid corrosion caused by dissimilar metals.

Gasket is a preformed, high temperature U.L. listed silicone rubber. Gasket is

replaceable.

Gasketed lid with two piece “tongue & groove” construction provides protection against

access of oil, dust and water.

Internal DIN rail mounting tabs.

Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self tapping

screws for P.C. board or inner panel mounting in all but the smallest size.

Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest

size

Finish

Color is light gray (RAL 7035)

Accessories

Optional Inner Panel

Heavy duty panels for mounting components

Galvanized 16 ga. steel.

Includes mounting hardware.

Optional Mounting Feet

Part No. 1554FT

Quality Products. Service Excellence.