www.panduit.com

specifications

All 4" EMT terminations with high performance communication cable

entering/exiting the conduit shall be fitted with a device to control the

bend radius of the communication cable to a minimum of a 4" radius.

The device to control the bend radius must comply with all National

Electrical Code requirements and TIA/EIA Standards. In addition, the

product must be RoHS compliant to meet environmental requirements,

be UL 94V-0 approved to reduce the spread of flame, and be approved

by UL for use in air handling spaces. The device to provide bend radius

control must support a static load of 40 lbs. (177.9 N) and have a

fastening device that allows for incremental adjustments to conform to

variances in conduit diameters.

Conduit Waterfall

Spe C ifi C a tion SH eet

applications

The Panduit conduit waterfall is designed for 4" EMT

conduit to cost-effectively manage sensitive network

cables in compliance with the TIA/EIA standards.

The conduit waterfall is suitable for use in air

handling spaces and areas requiring UL approvals.

The product allows for installation in retro-fit

applications where communication cables are

already installed. The conduit waterfall offers

innovative features that speed installation and is

part of the complete range of cable management

accessories available from Panduit.

key features and benefits

Complete bend

radius control

Helps prevent degradation of cable performance; prevents pinch points

that could cause damage to cable

UL 94V-0

approved material

Meets flame retardant specifications

UL 2043 approved

Suitable for use in air handling spaces in accordance with Section 300.22

(c) and (d) of the National Electrical Code

UL 1565 approved

Passes UL requirements for Positioning Devices

UL 514B approved

Passes UL requirements for Conduit, Tubing, and Fittings

Hinged design

Allows product to be completely opened for retro-fit applications

Captive nut

and thumb screw

Permits an easy and fast installation to reduce labor cost

Allows for incremental adjustments to conform to variances

in conduit diameters

Cable tie slots

Allow user to install 3/4" Tak-Ty ® Hook & Loop Cable Ties and provides a

method to retain and manage the cable bundle without over tensioning

Internal rib

Provides a positive stop for positioning the device securely to 4" EMT

conduit; protects network cable to maintain data integrity on the network

Holes in product collar

Provides a method to secure firestopping pillows within conduit

technical information

Material:

Glass Reinforced Flame Retardant Nylon 6.6

UL recognized:

File number E136577

Temperature range:

-40°F – 140°F (-40°C – 60°C)

RoHS compliance

Material is RoHS compliant per European Directive 2002/95/EC on the

Restriction of Hazardous Substances (RoHS)

Flammability:

Material passes UL94 standard, V-0 for flammability

Static load rating:

40 lbs. (177.9 N)

Conduit

compatibility:

4" EMT only

Bend radius

compliance:

4" minimum bend radius allowed

Packaging:

1 piece per package

Conduit Accessories

Conduit waterfall:

CWF400

Ladder Rack Accessories

Waterfall kit:

CMW-KIT

Double waterfall:

CMW2B

1.25" cable

rack spacer:

CRS4-125-X

0.8" cable

rack spacer:

CRS6-X

Horizontal J-Hook Pathways

3/4" hook for

wall mount:

JP75W-L20

3/4" hook with

drop wire clip:

JP75DW-L20

3/4" hook for

ceiling mount:

JP75CM-L20

3/4" hook with

screw-on

beam clamp:

JP75SBC50R-L20

1 5/16" hook for

wall mount:

JP131W-L20

1 5/16" hook with

drop wire clip:

JP131DW-L20

1 5/16" hook for

ceiling mount:

JP131CM-L20

1 5/16" hook with

screw on

beam clamp:

JP131SBC50R-L20

2" hook for

wall mount:

JP2W-L20

2" hook with

drop wire clip:

JP2DW-L20

2" hook for

ceiling mount:

JP2CM-L20

2" hook with

screw-on

beam clamp:

JP2SBC50R-L20

Cable Management Accessories

D-ring with

5.70"L x 2.00"W

outside dimensions: CMVDR1

D-ring with

3.30"L x 2.00"W

outside dimensions: CMVDR1S

D-ring with

5.70"L x 3.00"W

outside dimensions: CMVDR2

D-ring with

3.30"L x 3.00"W

outside dimensions: CMVDR2S

Adhesive backed

mount for

3/4" Tak-Ty ®

Hook & Loop

Cable Ties:

ABMT-A-C