Data Sheet

ADN4620/ADN4621

SPECIFICATIONS

analog.com

Rev. A | 7 of 28

DIN V VDE V 0884-11 (VDE V 0884-11) INSULATION CHARACTERISTICS (PENDING)

This isolator is suitable for reinforced electrical isolation only within the safety limit data. Protective circuits ensure the maintenance of the safety

data.

Table 9. RS-20 Shrink Small Outline Package [SSOP]

Description

Test Conditions/Comments1

Symbol

Characteristic

Unit

Installation Classification per DIN VDE 0110

For Rated Mains Voltage ≤ 150 V rms

I to IV

For Rated Mains Voltage ≤ 300 V rms

I to IV

For Rated Mains Voltage ≤ 600 V rms

I to III

For Rated Mains Voltage ≤ 1000 V rms

I to II

Climatic Classification

40/125/21

Pollution Degree per DIN VDE 0110, Table 1

2

Maximum Working Insulation Voltage

VIORM

1500

VPEAK

Input to Output Test Voltage, Method B1

VIORM × 1.875 = VPD (M), 100% production test, tINI = tM = 1

sec, partial discharge < 5 pC

VPD (M)

2813

VPEAK

Input to Output Test Voltage, Method A

VPD (M)

After Environmental Tests Subgroup 1

VIORM × 1.5 = VPD (M), tINI = 60 sec, tM = 10 sec, partial

discharge < 5 pC

2250

VPEAK

After Input or Safety Test Subgroup 2 and Subgroup 3 VIORM × 1.2 = VPD (M), tINI = 60 sec, tM = 10 sec, partial

discharge < 5 pC

1800

VPEAK

Highest Allowable Overvoltage

VIOTM

6000

VPEAK

Surge Isolation Voltage, Reinforced

VPEAK = 10 kV, 1.2 µs rise time, 50 µs, 50% fall time

VIOSM

6250

VPEAK

Safety Limiting Values

Maximum value allowed in the event of a failure (see Figure 3)

Maximum Junction Temperature

TS

150

°C

Total Power Dissipation at 25°C

PS

ADN4620

1.89

W

ADN4621

1.96

W

Insulation Resistance at TS

VIO = 500 V

RS

>109

Ω

1 For information about tM, tINI, and VIO, see DIN V VDE V 0884-11.

Figure 3. Thermal Derating Curve, Dependence of Safety Limiting Values with Ambient Temperature per DIN V VDE V 0884-11, SSOP

Table 10. RI-16-3 Wide Body, with 15.1 mm Creepage [SOIC_IC] Package

Description

Test Conditions/Comments1

Symbol

Characteristic

Unit

Installation Classification per DIN VDE 0110

For Rated Mains Voltage ≤ 150 V rms

I to IV

For Rated Mains Voltage ≤ 300 V rms

I to IV

For Rated Mains Voltage ≤ 600 V rms

I to IV

For Rated Mains Voltage ≤ 1000 V rms

I to III