Project 2. DIY 3D Printed IoT Weather Station Using an ESP32

Introduction: Today we’re going to be building a wireless outdoor weather

station that takes temperature, humidity, barometric pressure, light and wind

speed readings, and uses WiFi to post the data to the cloud which can then be

accessed through a Thingspeak dashboard.

Project 3. Smart Compost Bin Monitoring System -Based on 4G IoT and

SHT20

Introduction:

The other day my friend asked me to help him remake his compost bin, he

wants a device that allows him to remotely get the real-time temperature and

humidity inside. So I add some electronic parts on it.

DOCUMENTS

• Product wiki

SHIPPING LIST

• FireBeetle 2 Board ESP32-E with Header x1

• 18pin-2.54mm Pitch Pin x1

• 18pin-2.54mm Pitch Pin Female x1

• 14pin-2.54mm Pitch Pin x1

• 14pin-2.54mm Pitch Pin Female x1