2 / 5 page
P600 Series
6A Power Diodes
Page 2
31/05/05 V1.0
P600A
P600D P600G P600K P600M
Units
Maximum recurrent peak reverse voltage
50
200
400
800
1000
V
Maximum RMS voltage
35
140
280
560
700
Maximum DC blocking voltage
50
200
400
800
1000
Maximum average forward rectified current TA = 55°C
6.0
A
Maximum overload surge current at 1 cycle (Note 1)
400
Maximum forward voltage at 6.0A dc
1.0
V
Maximum DC reverse current at TA = 25°C
10
µA
Rated DC blocking voltage at TA = 100°C
1.0
mA dc
Typical junction capacitance (Note 3) CJ
150
pF
Typical thermal resistance (Note 2) R
θJA
Typical thermal resistance (Note 2) R
θJL
20.0
4.0
°C/W
Operating temperature range
-55 to +150
°C
Storage temperature range
Maximum Ratings and Electrical Characteristics:
At TA = 25°C unless otherwise specified. Single phase, half-wave, 60Hz, resistive or inductive load.
All values except maximum RMS voltage are registered JEDEC parameters.
NOTES:
1. Peak forward surge current, per 8.3ms single half-sine-wave superimposed on rated load (JEDEC method).
2. Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length PCB mounted with 1.1 × 1.1”
(30 × 30mm) copper pads.
3. Measured at 1MHz and applied reverse voltage of 4.0 volts.
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
