464

General Purpose Relay – G2RS

PFP-100N, PFP-50N

4.5

15

25

25

25

25

10

10

1,000 (500)

7.3

±0.15

35

±0.3

27

±0.15

1

15 (5)

It is recommended to use a panel 1.6 to 2.0 mm thick.

PFP-100N2

4.5

15

25

25

25

25 15

10

10

1,000

35

±0.3 27

24

16

29.2

11.5

PFP-M

PFP-S

50

11.5

10

6.2

1.8

1

35.5 35.3

1.8

1.3

4.8

5

16

12

44.3

34.8

10

16.5

M4 x 8 pan

head screw

Mounting Tracks

End Plate

CAUTION

Do not use the test button for any purpose other than

testing. Be sure not to touch the test button accidentally as

this will turn the contacts ON. Before using the test button,

confirm

that

circuits,

the

load,

and

any

other

connected item will operate safely.

CAUTION

Check that the test button is released before turning

ON relay circuits.

CAUTION

If the test button is pulled out too forcefully, it may

bypass the momentary testing position and go straight into

the locked position.

CAUTION

Use an insulated tool when you operate the test

button.

Precautions

PRECAUTIONS FOR P2RF-■-S CONNECTION

• Do not move the screwdriver up, down, or from side to side

while it is inserted in the hole. Doing so may cause damage to

internal components (e.g., deformation of the clamp spring or

cracks in the housing) or cause deterioration of insulation.

• Do not insert the screwdriver at an angle. Doing so may break

the side of the socket and result in a short-circuit.

CAT. No. J114-E2-02

Omron A5 Catalogue 2007 419-518

11/9/06

11:04 am

Page 464