E6CP-A

5

Safety Precautions

Refer to Warranty and Limitations of Liability.

This product is not designed or rated for ensuring

safety of persons either directly or indirectly.

Do not use it for such purposes.

Do not use the Encoder under ambient conditions that exceed the

ratings.

● Mounting

For front-surface mounting, the maximum tightening torque is

1.76 N·m. (Effective screw length: 7 mm min.)

● Wiring

Spurious pulses may be generated for outputs when power is turned

ON. Wait at least 1 s after turning ON the power to the Encoder before

using the connected device.

● Connection

Spurious pulses may be generated when power is turned ON and

OFF. Wait at least 1 s after turning ON the power to the Encoder

before using the connected device, and stop using the connected

device at least 1 s before turning OFF the power to the Encoder.

Also, turn ON the power to the load only after turning ON the power

to the Encoder.

(Unit: mm)

Dimensions

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Encoder

WARNING

Precautions for Correct Use

The E69-C06B Coupling is provided.

The E69-C06B Coupling is sold separately.

E6CP-AG3C

E6CP-AG5C

45˚

45˚

8

3

5

50

10

*

40

50 dia.

1

56 dia.

38 dia.

Four,

M4 holes;

Depth: 10 mm

* 6-dia. vinyl-insulated round cable with

10 conductors (Conductor cross section:

0.18 mm

2, Insulator diameter: 1.0 mm),

Standard length: 2 m

6

-0.008

-0.020 dia.

25 0

-0.2 dia.

E6CP-AG5C-C

1

8

3

5

50

10

50 dia.

56 dia.

45˚

45˚

*2

*1

37

40

2,000

16.9 dia.

38 dia.

Four,

M4 holes;

Depth: 10 mm

*1. 6-dia. vinyl-insulated round cable with

10 conductors (Conductor cross

section: 0.18 mm

2, Insulator diameter:

1.0 mm), Standard length: 2 m

*2. H8PS Cam Positioner connector.

6

-0.008

-0.020 dia.

25 0

-0.2 dia.