PACKAGE MECHANICAL DATA

DO-201AD (Plastic)

BA

E

E

ØD

ØD

ØC

B

note 2

note 1

note 1

REF.

DIMENSIONS

NOTES

Millimeters

Inches

Min.

Max.

Min.

Max.

A

9.50

0.374

1 - The lead diameter

∅ D is not controlled over zone E

2 - The minimum axial lengh within which the device may be

placed with its leads bent at right angles is 0.59"(15 mm)

B

25.40

1.000

∅ C

5.30

0.209

∅ D

1.30

0.051

E

1.25

0.049

Marking: type number, white band indicate cathode

Cooling method: by convection (method A)

Weight: 1g

Date code

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsIbility for the consequences of

use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by

implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to

change without notice. This publication supersedes and replaces all information previously supplied.

STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap-

proval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

© 1998 STMicroelectronics - Printed in Italy - All rights reserved.

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco -

The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.

PFR850 -> 856

3/3