AS5600-ASOT datasheet(16/43 Pages) AMSCO

16 / 43 page

Page 16

ams Datasheet

Document Feedback

[v1-06] 2018-Jun-20

AS5600 − Detailed Description

Figure 18:

Data Write (Slave Receiver Mode)

Slave Transmitter Mode (Read Mode)

The first byte is received and handled as in the slave receiver

mode. However, in this mode, the direction bit indicates that

the AS5600 will drive data on SDA. START and STOP conditions

are recognized as the beginning and end of a bus transaction.

The slave address byte is the first byte received after the master

generates a START condition. The slave address byte contains

the 7-bit AS5600 address. The 7-bit slave address is followed by

the direction bit (R/W), which, for a read, is 1 (high). After

receiving and decoding the slave address byte, the slave device

drives an acknowledge on the SDA line. The AS5600 then begins

to transmit data starting with the register address pointed to

by the address pointer. If the address pointer is not written

before the initiation of a read transaction, the first address that

is read is the last one stored in the address pointer. The AS5600

must receive a not acknowledge (NACK) to end a read

transaction.

Figure 19:

Data Read (Slave Transmitter Mode)

0110110

0 A

XXXXXXXX

S – Start

A – Acknowledge (ACK)

Data transferred: X+1 Bytes + Acknowledge

P – Stop

<Data(n)>

<Data(n+X)>

XXXXXXXX

<Data(n+1)>

0110110

1 A

XXXXXXXX

XXXXXXXX NA

S – Start

A – Acknowledge (ACK)

Data transferred: X+1 Bytes + Acknowledge

NA – Not Acknowledge (NACK)

Note: Last data byte is followed by NACK

P – Stop

<Data(n)>

<Data(n+1)>

<Data(n+X)>

XXXXXXXX

<Data(n+2)>

AS5600-ASOT bảng dữ liệu(PDF) 16 Page - ams AG

AS5600-ASOT bảng dữ liệu(HTML) 16 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

bảng dữ liệu tải về

Link URL