| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
R5F52618BDFM bảng dữ liệu(PDF) 6 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R5F52618BDFM bảng dữ liệu(HTML) 6 Page - Renesas Technology Corp |
|
6 / 142 page ![]() R01DS0430EJ0100 Rev.1.00 Page 6 of 142 Jul 31, 2024 RX260 Group, RX261 Group 1. Overview Communication functions Serial communications interfaces (RSCI) 3 channels (RSCI0, RSCI8, RSCI9) Serial communications modes: Asynchronous, clock synchronous, and smart-card interface Multi-processor function On-chip baud rate generator allows selection of the desired bit rate Choice of LSB-first or MSB-first transfer Start-bit detection: Level or edge detection is selectable. Simple I2C Simple SPI 9-bit transfer mode Bit rate modulation Double-speed mode Supports the serial communications protocol, which contains the start frame and information frame Supports the LIN format (RSCI9) Data can be transmitted or received in sequence by the 32-byte FIFO buffers of the transmission and reception unit Manchester encoding is supported (RSCI9). RSCI has some home bus system (HBS) functionality. Data match detection Adjustment of the timing of sampling of the RXD signals I2C bus interface (RIICa) 1 channel Communications formats: I2C bus format/SMBus format Master mode or slave mode selectable Supports fast mode Serial peripheral interface (RSPIc) 1 channel Transfer facility Using the MOSI (master out, slave in), MISO (master in, slave out), SSL (slave select), and RSPCK (RSPI clock) signals enables serial transfer through SPI operation (four lines) or clock-synchronous operation (three lines) Capable of handling serial transfer as a master or slave Data formats Choice of LSB-first or MSB-first transfer The number of bits in each transfer can be changed to 8 to 16, 20, 24, or 32 bits. 128-bit buffers for transmission and reception Up to four frames can be transmitted or received in a single transfer operation (with each frame having up to 32 bits) Transit/receive data can be swapped in byte units Double buffers for both transmission and reception RSPCK can be stopped with the receive buffer full for master reception. CANFD module (CANFD) 1 channel Compliance with the ISO11898-1:2015 specification (standard frame and extended frame) USB 2.0 FS host/ function module (USBe) Includes a UDC (USB Device Controller) and transceiver for USB 2.0 FS One port Compliance with the USB 2.0 specification Transfer rate: Full speed (12 Mbps), low speed (1.5 Mbps) (host only) Both self-powered mode and bus-powered mode are supported OTG (On the Go) operation is possible (low-speed is not supported) Incorporates 2 Kbytes of RAM as a transfer buffer External pull-up and pull-down resistors are not required Remote control signal receiver (REMCa) 1 channel Four pattern matching (header, data 0, data 1, and special data detection) 8-byte receive buffer per unit The operating clock can be selected from among the PCLKB, sub-clock, IWDTCLK, and TMR. Table 1.1 Outline of Specifications (5/6) Classification Module/Function Description |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |