2

INTRODUCTION

Thank you for purchasing this CLARKE Pressure Regulator.

Before attempting to use the product, it is essential that you read this manual

thoroughly and carefully follow all instructions given. In doing so you will

ensure the safety of yourself and that of others around you, and you can also

look forward to the product giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTION

Do not dispose of this product with general household waste. All tools,

accessories and packaging should be sorted, taken to a recycling

centre and disposed of appropriately.

FUNCTION

This pressure regulator is ideal for use with most TIG welding machines, in

particular, the CLARKE AT welder range.

The function of the pressure regulator is to reduce and stabilise the pressure

of a gas supply stored in the cylinder. It is used to reduce the pressure to a

level which is suitable for use with standard welding equipment.

The pressure regulator has been designed to be used exclusively with the

type of gas, and at the pressure indicated in the Technical Specification on

page 7.

IMPORTANT: To use the pressure regulator with types of gasses and

pressures other than CO2 or Argon could be dangerous.