| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
R5F11W67ASM bảng dữ liệu(PDF) 13 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R5F11W67ASM bảng dữ liệu(HTML) 13 Page - Renesas Technology Corp |
|
13 / 31 page ![]() RL78/G1M, G1N 2. ELECTRICAL SPECIFICATIONS R01DS0378EJ0100 Rev.1.00 13 of 28 May 29, 2020 2.3 DC Characteristics 2.3.1 Pin characteristics of RL78/G1M (TA = –40 to +85°C, 2.0 V ≤ VDD ≤ 5.5 V, VSS = 0 V) Parameter Symbol Conditions MIN. TYP. MAX. Unit Output current, highNote 1 IOH1 Per pin for P00 to P07, P10 to P16, P40 –10Note 2 mA Total of P00 to P05 (When duty ≤ 70%)Note 3 4.0 V ≤ VDD ≤ 5.5 V –50 mA 2.7 V ≤ VDD < 4.0 V –10 mA 2.0 V ≤ VDD < 2.7 V –7.5 mA Total of P06, P07, P10 to P16, P40 (When duty ≤ 70%)Note 3 4.0 V ≤ VDD ≤ 5.5 V –80 mA 2.7 V ≤ VDD < 4.0 V –16 mA 2.0 V ≤ VDD < 2.7 V –12 mA Total of all pins (When duty ≤ 70%)Note 3 –130 mA Output current, low IOL1 Per pin for P00 to P07, P10 to P16, P40 20Note 2 mA Total of P00 to P05 (When duty ≤ 70%)Note 4 4.0 V ≤ VDD ≤ 5.5 V 60 mA 2.7 V ≤ VDD < 4.0 V 9 mA 2.0 V ≤ VDD < 2.7 V 1.8 mA Total of P06, P07, P10 to P16, P40 (When duty ≤ 70%)Note 4 4.0 V ≤ VDD ≤ 5.5 V 100 mA 2.7 V ≤ VDD < 4.0 V 15 mA 2.0 V ≤ VDD < 2.7 V 3 mA Total of all pins (When duty ≤ 70%)Note 4 160 mA Notes 1. Value of current at which the device operation is guaranteed even if the current flows from the VDD pin to an output pin. 2. Do not exceed the total current value. 3. Specification under conditions where the duty factor ≤ 70%. The output current value that has changed to the duty factor > 70% the duty ratio can be calculated with the following expression (when changing the duty factor from 70% to n%). ● Total output current of pins = (IOH × 0.7)/(n × 0.01) <Example> Where n = 80% and IOH = -10.0 mA Total output current of pins = (-10.0 × 0.7)/(80 × 0.01) ≈ -8.7 mA However, the current that is allowed to flow into one pin does not vary depending on the duty factor. A current higher than the absolute maximum rating must not flow into one pin. 4. Specification under conditions where the duty factor ≤ 70%. The output current value that has changed to the duty factor > 70% the duty ratio can be calculated with the following expression (when changing the duty factor from 70% to n%). ● Total output current of pins = (IOL × 0.7)/(n × 0.01) <Example> Where n = 80% and IOL = 10.0 mA Total output current of pins = (10.0 × 0.7)/(80 × 0.01) ≈ 8.7 mA However, the current that is allowed to flow into one pin does not vary depending on the duty factor. A current higher than the absolute maximum rating must not flow into one pin. Caution P06 and P10 do not output high level in N-ch open-drain mode. Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |