21/26

5.3.2. LED Color Change/Version Confirmation

When all LED tiers flash a green color, the “LED Color Change/Version Confirmation” can be selected while it is in that status. As

shown in the following figure, when the Multiple-function Button is pushed for about 0.5 seconds, 3 different selections: the “LED

Color Change”; “Version Confirmation”; and returning to “Signal Tower” mode, can be selected. Once the selection is made, if the

Multiple-function button is pushed about 3 seconds longer, then the mode goes into the status selected.

5.3.2.1. LED Color Change

The LED color which operates in the “Signal Tower” mode can be changed. First, the LED color change starts from the1st tier

where the red LED turns on. As shown in the following figure, whenever the Multiple-function button is pressed for a short time

(about 0.5 second), the 1st LED Tier color changes in order.

Push Button

About 3 sec.

Push Button

About 0.5 sec.

LED Color Change

Version Conrmaton

Returns to “Signal

Tower” mode

Push Button

About 3 sec.

Push Button

About 0.5 sec.

Push Button

About 3 sec.

Push Button

About 0.5 sec.

Push Button

About 3 sec.

The contents are

selected and entered

Returns back to “Signal Tower” mode

if no input occurs after 15 seconds.

Green

White

OFF

21/26