2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATIONS

SAFETY PRECAUTIONS

ALWAYS seek assistance when lifting heavy items.

ALWAYS keep children and animals away from tools and work areas.

ALWAYS keep work area clean and free from oil spills etc.

ALWAYS wear protective footwear when assembling the workbench.

ASSEMBLY

Thank you for purchasing this CLARKE product. Please read and follow the

instructions carefully. Unpack your workbench and check to ensure that no

damage was suffered during transit. Should any damage be apparent you

should contact your CLARKE dealer immediately.

The kit comprises the workbench top, lower tray and four legs with 16xM8 bolts

with nuts and flat washers, the drawer, backstops and drawer runners with M6

screws. Position multiple units to create a run of benches for industrial use.

The workbench is best assembled

with the help of an assistant.

1. Rest the workbench top upside

down on a soft, protective surface

and fit the drawer backstops to the

base using the 4 x M6 screws,

washers and bolts. Use with a

CD3WB 3-drawer unit only.

2. At each of the rear mountings,

attach a leg, with the foot pad

CWB2001P

Dimensions (w x d x h) mm

2000 x 650 x 865

Weight

68 kg

Maximum Load (table top)

300 kg

Maximum Load in Drawer

30 kg

Maximum Load (shelf)

80 kg

Maximum Load (CD3WB 3- drawer unit-sold separately)

90 kg