4

ELECTRICAL CONNECTIONS

Co

nnect the mains lead to a suitable 110 Volt (50Hz) electrical supply through

an approved plug or a suitably fused isolator switch, or to a suitable portable

110 volt transformer.

We recommend that this pump is fitted with a Residual Current Device (RCD).

If the pump is to be connected to an outdoor electrical supply, ensure both

the plug and the socket are of a British Standard approved waterproof design.

The wires in the mains lead are coloured according to with the following code:

Green & Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the flexible power cable of this appliance may not

correspond with the coloured markings identifying terminals in your plug

proceed as follows:

• Connect GREEN & YELLOW wire to the terminal marked with a letter “E” or

Earth symbol ‘

’or coloured GREEN or GREEN & YELLOW.

• Connect BROWN wire to terminal marked with a letter “L” or coloured RED

• Connect BLUE wire to terminal marked with “N” or coloured BLACK

IMPORTANT: If you are in any doubt regarding electrical installation, you should

consult a qualified electrician.

PUMP PERFORMANCE DATA

WARNING: THIS APPLIANCE MUST BE EARTHED