5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Join the two end assemblies

together with the long beams (C)

as in Fig 3.

3. Connect the centre support

beams (e) to the long beams (C)

by bending the flexible tabs to 90

degrees and slotting them into

place as shown in Fig 4. Finally

bend the tabs back 180 degrees

to lock in place.

4. Fit post joining inserts (F) into the

corner posts (A), ensuring that the

inserts are fitted with their keyholes

to match those of the corner posts.

5. Construct the upper end

assemblies onto the post inserts (F)

before adding more long beams

and centre supports as previously

to complete the framework.

NOTE: Remember that the top shelf

should be fitted at the highest possible position.

6. Lay the shelf panels (B) into

position.

•

Always assemble the top shelf at

the highest possible position.