7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

5. Repeat steps 2 to 4 to attach the next set of beams (B) at the same level to

form the second and third shelf frames as shown in fig 2.

NOTE: The units are adjustable in 3” increments.

6. Ensure the last two beams (B) are set into the top two keyholes of the

upright frames as shown in Fig 3.

7. Position the deck supports (C) to span between the beams (B), engaging

the support end in the socket provided in the beam. Four supports per shelf

are required at the positions shown.

8. Place the deck panels (D) onto the deck supports, resting on the top

flange of the beams. Make sure the deck panels sit properly between the

beamsand lay flush as shown in Fig 4.

9. Periodically inspect the unit to ensure the beams are seated correctly and

are firmly connected to the columns. Take care not to overload the

shelves.