| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
DIO75530LCD6 bảng dữ liệu(PDF) 11 Page - DIOO MICROCIRCUITS CO., LTD |
|
|
|||||||||||||||||||||||||||||
DIO75530LCD6 bảng dữ liệu(HTML) 11 Page - DIOO MICROCIRCUITS CO., LTD |
|
11 / 15 page ![]() DIO75530 Version 1.3, Aug 2025 www.dioo.com © 2025 Dioo Microcircuits Co., Ltd. Jiangsu 8 9. Application Information Important notice: Validation and testing are the most reliable ways to confirm system functionality. The application information is not part of the specification and is for reference purposes only. 9.1. Operation information The DIO75530 is a current limited P-channel MOSFET power switch with overcurrent and over-temperature protection. There is no body diode across the drain and the source of the MOSFET. It prevents the current flow from the output to the input after the chip is disabled. 9.2. Supply filter capacitor In order to prevent the input voltage from dropping during hot-plug condition, a 10 µF ceramic capacitor from VIN to GND is strongly recommended. However, higher capacitance could help reduce the voltage drop. Further more, an output short will cause ringing on the input without the input capacitor. It could destroy the internal circuitry when the input transient voltage exceeds the absolute maximum supply voltage even for a short duration. 9.3. Overcurrent and overtemperature protection When the overcurrent condition is detected, the switch is regulated to achieve constant output current. If the overcurrent condition lasts for a long time, and results in a junction temperature over 140°C, the switch will be shutdown. As soon as the junction temperature drops to 120°C, the part will restart. 9.4. Reverse-voltage protection The reverse-voltage protection feature turns off the P-channel MOSFET whenever the output voltage exceeds the input voltage by 175 mV (typ). A reverse current of (VOUT - VIN) / RDS(ON) will be present when this occurs. This prevents damage to devices on the input side of the DIO75530 by preventing significant current from sinking into the input capacitance. The DIO75530 devices allow the P-channel MOSFET to turn on as soon as the output voltage goes bellow the input voltage. 9.5. FAULT output Error flag is an open-drain output of a N-channel MOSFET. If current limiting or short circuit occurs, FAULT is pulled low after a delay of 8 ms (typ), and if no current limiting or short circuit occurs, FAULT is pulled high after a delay of 8 ms (typ). If reverse-voltage protection occurs, FAULT is pulled low after a delay of 4 ms (typ), and if no reverse-voltage protection occurs, FAULT is pulled high after a delay of 4 ms (typ). If overtemperature protection occurs, FAULT is pulled low immediately, and if no overtemperature protection occurs, FAULT is pulled high after a delay of 8 ms (typ). |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |