AS3412 datasheet(36/85 Pages) AMSOSRAM

36 / 85 page

ams Datasheet

Page 35

[v1-00] 2016-Apr-06

Document Feedback

AS3412 − Detailed Description

Slider Mode

Slider Mode is similar to Full Slider Mode with the only

difference that it is possible to use a push button (S3) to enable

and disable the Monitor Mode. Be aware that for Slider Mode

operation bit SLIDE_PWR_UP has to be set to ‘1’ and the SLIDER_

MON bit has to be set to ‘0’.

Figure 45:

Slider Mode

Slider Mode: The diagram shows the external connection of the switches and push button in slider mode.

The advantage of this mode compared to Full Slider Mode is the

automatic hold function of the Monitor Mode. Once the push

button S3 is pressed the device enters monitor mode. This mode

stays active until the user pushes the button again.

Figure 46:

Slider Mode Timing Diagram

Slider Mode Timing Diagram: The diagram shows the necessary voltages and timings for different operation

modes in Slider Mode configuration.

MODE/CSCL

ANC/CSDA

Control Logic

VBAT

22kΩ

OFF

ANC

PBO

22kΩ

MONITOR

MODE/CSCL Pin

OFF

MONITOR

OFF

>2ms

>24ms

>10ms

>=1.65V

VBAT

45% - 55% VBAT

Operation Mode

<0.3V

AS3412 bảng dữ liệu(PDF) 36 Page - ams-OSRAM AG

AS3412 bảng dữ liệu(HTML) 36 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85

bảng dữ liệu tải về

Link URL