9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

USING THE SAFETY KICKSTAND

The safety kickstand on the rear of

the planer swings down to help keep

the blade from touching the

workbench when the planer is not

being used.

The kickstand is designed to swing up

and out of the way when the back of

the planer crosses the leading edge

of the workpiece.

DUST EXTRACTION

The wood shavings can be set to flow from either side of the tool to suit the

task at hand.

1. Set the extraction guide switch to

point towards the extraction port

that you wish the chips to flow

towards.

2. If desired, you can connect your

planer to a suitable dust

extraction system through the

extraction port, the dust

extraction hose adaptor

(included) may be needed

depending on the size of your

extraction hose.

WARNING: SHAVINGS MAY JAM IN THE DUST EXTRACTION PORT WHEN

CUTTING DAMP WOOD. DO NOT INSERT YOUR FINGER INTO THE DUST

EXTRACTION PORT. CLEAN OUT THE SHAVINGS WITH A STICK, BUT ONLY

WHEN THE BLADE HAS STOPPED RUNNING AND THE TOOL HAS BEEN

DISCONNECTED FROM THE POWER SOURCE.