FEATURES

This staple gun is capable of accepting the following;

• Staples ....................................

• ‘U’ shaped Staples ................................

• Nails ........................................

OPERATION

Thank you for purchasing this CLARKE 3-WAY Staple

Gun.

Please read this leaflet thoroughly and follow the

instructions carefully. In doing so you will ensure the

safety of yourself and that of others around you and

you can look forward to the Staple Gun giving you

long and satisfactory service.

SAFETY PRECAUTIONS

Extreme care should be exercised when using the

Staple Gun.

•

Never point it at anyone.

•

Do not allow children to use the gun.

•

When not in use, you should always remove

any staples or nails remaining in the gun

and secure the handle with the safety

catch (A).

Take extra care when stapling into walls.

The danger of coming in to contact with

electric cables or plastic water pipes should

not be overlooked.

WARNING: Do not staple cables carrying

electric current.

3-Way Staple Gun

See ‘Accessories’ on reverse

Model No: CSG10

Part No: 1800200

GUARANTEE

This CLARKE product is guaranteed against faulty

manufacture for a period of 12 months from the

date of purchase. Your receipt is required as proof

of purchase.

This guarantee is invalid if the product is found to have

been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of

purchase, no product can be returned to us

without prior permission.

This guarantee in no way effects your statutory rights

under common law.

1. Loading the Gun

(a)

Press in the plate (J), against spring pressure,

dislocating the tab (H) from its slot, and with

slight downwards movement, remove the

pressure rod and spring assembly (G) from

the back of the gun.

(b)

Ensure there are no old or disfigured staples

or nails in the gun, as these could cause it to

jam (see Maintenance section). Slide the

appropriate staples into the carriage as

shown below

(c)

Replace the pressure rod assembly against

spring pressure ensuring the end plate tab

(H) is correctly located in the slot in the gun

body.