DS312 datasheet(21/22 Pages) BRIDGELUX

21 / 22 page

Bridgelux SMD 2835 0.5W 3V Thrive Product Data Sheet DS312 Rev. E (07/2024)

Design Resources

Disclaimers

Precautions

Please contact your Bridgelux sales representative for assistance.

MINOR PRODUCT CHANGE POLICY

The rigorous qualification testing on products offered

by Bridgelux provides performance assurance. Slight

cosmetic changes that do not affect form, fit, or function

may occur as Bridgelux continues product optimization.

CAUTION: CHEMICAL EXPOSURE HAZARD

Exposure to some chemicals commonly used in

luminaire manufacturing and assembly can cause

damage to the LED emitter. Please consult Bridgelux

Application Note AN51 for additional information.

CAUTION: EYE SAFETY

Eye safety classification for the use of Bridgelux SMD

LED emitter is in accordance with IEC

specification EN62778: Application of IEC 62471 for the

assessment of blue light hazard to light sources and

luminaires are classified as Risk Group 1 when operat-

ed at or below the maximum drive current. Please use

appropriate precautions. It is important that employees

working with LEDs are trained to use them safely.

CAUTION: RISK OF BURN

Do not touch the SMD LED emitter during operation.

Allow the emitter to cool for a sufficient period of time

before handling. The SMD LED emitter may reach

elevated temperatures such that could burn skin when

touched.

CAUTION

CONTACT WITH LIGHT EMITTING SURFACE (LES)

Avoid any contact with the LES. Do not touch the

LES of the emitter or apply stress to the LES

(yellow phosphor resin area). Contact may cause

damage to the emitter

Optics and reflectors must not be mounted in contact

with the LES (yellow phosphor resin area).

STANDARD TEST CONDITIONS

Unless otherwise stated, LED emitter testing is

performed at the nominal drive current.

DS312 bảng dữ liệu(PDF) 21 Page - Bridgelux, Inc.