STANNOL GmbH & Co. KG • TDS_Fine_Fluxer_350_EN • Stand: 23.01.2020

Haberstr. 24 • 42551 Velbert • Tel: +49 (0)2051-3120-0 • Fax: +49 (0)2051-3120-111 • E-Mail: info@stannol.de • www.stannol.de

2

PHYSICAL PROPERTIES AND DATA

GENERAL PROPERTIES

FINE FLUXER 350

Colour:

light-yellow

Density at (20° C):

0,811 g/cm3

Solid content:

3,5 %

Acid rating:

27 mg KOH/g

Copper mirror test:

passed

Silver chromate paper test:

passed

Surface Insulation Resistance:

>108 Ω

Corrosion:

none

SHELF LIFE

2 years (provided proper storage, unopened).

HEALTH AND SAFETY

Before using please read the material safety data sheet carefully and observe the safety precautions described.

NOTE

The above values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding

for the company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of

third parties, and does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or

purpose. Should any liability on the part of the company arise, the company will only indemnify for loss or damage to the same extent as for defects in quality.