R03DS0187EJ0100 Rev.1.00

Page 1 of 7

Mar.14.25

Datasheet

UPC4082

J-FET Input Dual Operational Amplifier

DESCRIPTION

UPC4082 is a dual operational amplifier incorporating well matched ion implant P-channel J-FET on the same

chip with standard bipolar transistors. The key feature of this op amp is very low input bias current and high

slew rate for ten times faster than conventional general purpose op amps. By these features the UPC4082 is

excellent choice for wide variety of applications including integrator, active filter, pulse amp etc.

FEATURES

•

Input Offset Voltage

±5 mV (TYP.)

•

Input Bias Current

30 pA (TYP.)

•

Slew Rate

13 V/μs (TYP.)

•

Unity Gain Frequency

3 MHz (TYP.))

•

Input Equivalent Noise Voltage Density

25 nV/ Hz (TYP.) (f = 1 kHz)

•

Built-In Phase Compensation Circuit

•

Built-In Output Short Circuit Protection

•

Standard Dual Op-Amp terminal connection (pin compatible)

ORDERING INFORMATION

Order Name (1)

Package

UPC4082G2-AP

8-Pin plastic SOP ( 5.72 mm ( 225 ))

(1) Order names containing E1 or E2 indicate that the packaging format is embossed taping.

Pin 1 of E1 is on draw-out side, and pin 1 of E2 is at take-up side.

EQUIVALENT CIRCUIT (1/2 Circuit)

PIN CONFIGURATION (Top View)

UPC4082G2