DIO1269

www.dioo.com

© 2019 DIOO MICROCIRCUITS CO., LTD

DIO1269• Rev. 1.5

Absolute Maximum Ratings

Stresses beyond those listed under “Absolute Maximum Rating” may cause permanent damage to the device. These are stress

ratings only and functional operation of the device at these or any other condition beyond those indicated in the operational sections

of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Parameter

Rating

Unit

Supply Voltage

(VCC)

-0.5 to 5.5

V

Switch I/O Voltage (NC, NO, COM Pins)

-2 to 5.5

V

Control Input Voltage (S1,S2 Pins)

-0.5 to (V+)+0.3

V

Switch I/O Current

(Continuous)

350

mA

Peak Switch Current (Pulsed at 1ms Duration,<10 Duty Circle)

500

mA

Storage Temperature Range (TSTG)

-65 to 150

°C

Junction Temperature

150

°C

Lead Temperature Range

260

°C

MSL (Moisture Sensitivity Level, JEDEC J-STD-020A)

1

ESD

HBM, JEDEC: JESD22-A114

8

kV

CDM, JEDEC : JESD22-C101

2

Note: Input and output negative ratings may be exceeded if input and output diode current ratings are observed.

Recommended Operating Conditions

The Recommended Operating Conditions table defines the conditions for actual device operation to ensure optimal performance to

the datasheet specifications. DIOO does not recommend exceeding them or designing to Absolute Maximum Ratings.

Parameter

Rating

Unit

Supply Voltage

2.7 to 5.25

V

Control Input Voltage (S1,S2 Pins)

0 to VCC

V

Switch I/O Voltage (NC, NO, COM Pins)

-2 to VCC

V

Operating Temperature Range

-40 to 85

°C

Note: For 5V operation, SEL frequency (pins S1 & S2) should not exceed 100Hz and 50ns edge rate.