3651 Walnut Avenue, Chino, CA 91710

Phone: (909) 627-2453 • Web Site: MendaPump.com

© 2016 DESCO INDUSTRIES INC.

Employee Owned

TB-4015 Page 2 of 5

Installation

Extractor Installation Procedure

Remove Fume Extractor from the shipping carton and inspect for any damages. Make sure

you have access to the unit for filter maintenance.

Connect the power cord into the outlet on the side of the system. Plug the power cord into a

grounded wall socket.

Connect the arms/hose to the inlet on the base of the fume extractor.

To power up system, depress the power switch, located on the bottom right of the unit. The

operator can expect a delay of a few seconds before hearing the motor running. This is due to

the built-in motor “Soft-start” feature.

If utilized, connect the supplied remote Start/Stop switch to the system and site the switch

in a convenient position on the workbench. We recommend that this switch be used for your

convenience.

Position the extraction arms to optimize fume capture.

Follow maintenance procedures on next page.

Caution

To provide protection against the risk of electrical shock, connect to properly grounded outlets

only.

Features

• Efficient motor with “soft-start” feature

• Optional, remote Start/Stop switch

• Audible alarm to indicate blocked filters

• Low noise level <55 dba

• High suction force and airflow

• Compact and portable

• Standard Filter Efficiency at 95% (35474)

• Connects to 50mm (2") or 63mm(2.5") hoses or exhaust arms

• ESD safe housing

• Optional HEPA Filter Available (35472)

• Optional Gas Filter Available (35473)