Spray Nozzle

Wings

Fan Control

Fluid Control

Paint Cup Vent

Air Supply

Air flow Control

Paint Cup

Paint Cup

Locking Lever

GENERAL ARRANGEMENT

Pro-Gun spray guns are available with three nozzle sizes, 1.2mm, 1.4mm, and 1.8mm. The

larger the nozzle, the more compressed air is needed. Make sure your spray gun is matched

to the capacity of your compressor.

Model

Nozzle size

Compressor required

Pro-12C

1.2 mm

1.5 hp minimum

Pro-14C

1.4 mm

2.0 hp minimum

Pro-18C

1.8 mm

3.0 hp minimum

For best results, the air supply to the spray gun must be clean and dry, with no oil or water

contamination. Follow the air compressor manufacturer’s guidelines on installation and

operation to ensure that your air supply is as clean as possible. The compressed air supply

line to the spray gun must be fitted with an oil and water extractor and a suitable

pressure regulator.

Connect the air supply to the spray gun using a suitable 1/4” BSP fitting.

AIR SUPPLY

- 5 -

- 10 -

NOTES