4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES

THE WORK ENVIRONMENT

1. ALWAYS keep the work area clean and tidy.

2. ALWAYS dress appropriately - Do not wear loose clothing or jewellery. Tie

long hair out of the way.

3. ALWAYS keep children and visitors away - Do not let children handle the air

tool.

4. DO NOT operate the tool where there are flammable liquids or gases.

USE OF AIR POWERED TOOLS

1. ALWAYS stay alert and use common sense - do not operate the air tool

when you are tired or under the influence of alcohol, drugs or medication.

2. ALWAYS wear eye protectors when using the air tool - Eye protectors must

provide protection from flying particles from the front and the side.

3. ALWAYS wear ear protectors when using the air tool.

4. DO NOT overreach - Keep proper footing and balance at all times.

5. DO NOT use oxygen, CO2, combustible gases or any type of bottled gas as

a source of power for the air tool.

6. DO NOT connect the air supply hose with your finger on the trigger.

7. DO NOT exceed the maximum pressure for the air tool of 90 psi / 6.2 bar.

8. ALWAYS check hoses for leaks or worn condition before use, and ensure

that all connections are secure.

9. DO NOT use the air tool for any other purpose than that described in this

manual.

10. ALWAYS keep the air hose away from heat, oil and sharp edges.

11. DO NOT fit the air tool to a stand or clamping device that may damage it.

12. DO NOT carry out any alterations or modifications to the air tool.

13. ALWAYS disconnect from the air supply when:

• Performing any maintenance.

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.