13 / 21 page
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
DM163
8x3-CHANNEL CONSTANT CURRENT LED DRIVERS
Version: A.004
Page
12
Timing Diagram
Figure 4. Timing diagram when 6bits are correction terms and 8bits are image terms
When 6 bits are correction terms and 8 bits are image terms (as shown in Fig 4), users
must set the controller signals according to below sequences:
(1) Set SELBK=L (Bank 0) and begin shift in 6 bits correction data
(2) Set LAT_B=H to update the correction data after all correction data are in place
(3) Set SELBK=H (Bank 1) and begin shift in 8 bits image data
(4) Set LAT_B=H to update image data after 8 bit image are all in place. DM163 will utilize
the 8 bits image data to determine the grayscale of each channel
(5) Repeat steps (3) and (4)
Figure 5. Timing diagram when both 6bits and 8bits are used as image terms
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
