Page <1>

V1.0

05/01/21

Automatic Wire Stripper

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Features

•  Crimp terminals with and without insulation (10 to 22AWG - 0.5mm - 6mm)

•  With micro adjustment for greater precision when stripping wire

•  Jaws with hardness between 55 - 60 HRC

•  Strips 7 different cable insulators, from 0.2mm - 6mm²

•  By adjusting the micro adjustment pin, it is possible to control the wire gauge to be stripped

•  Regulate the pin (-) for thinner cables and (+) for thicker cables. The pliers do not damage the inner part of the wire

•  Recommended for cutting copper wires

•  Carbon steel blade

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for 

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change 

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, 

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make 

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or 

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its 

negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019.

Part Number Table

Description

Part Number

Automatic Wire Stripper, 0.2mm² to 6mm²

D03422

Specifications

Stripping Capacity AWG  : 24AWG to 10AWG  

Stripping Capacity Metric  : 0.2mm² to 6mm²  

For Use With 

: Copper Wires