PQ201 datasheet(5/42 Pages) PICO

5 / 42 page

PicoScope® 6000E Series

Mixed-signal operation

When fitted with optional 8-channel TA369 MSO pods, the PicoScope 6000E Series adds

up to 16 high-performance digital channels to up to eight analog channels, enabling

you to accurately time-correlate analog and digital signals. Digital channel bandwidth is

500 MHz, equivalent to 1 Gb/s with 1 ns minimum pulse width. The input capacitance of

only 3.5 pF minimizes loading on the device under test.

Digital channels, captured from either parallel or multiple serial buses, may be grouped

and displayed as a bus, with each bus value displayed in hex, binary or decimal, or as

a level (for DAC testing). You can set advanced triggers across the analog and digital

channels.

The digital inputs also bring extra power to the serial decoding feature. You can

decode serial data on all analog and digital channels simultaneously, giving you up to

24 channels of data – for example, decoding multiple SPI, I²C, CAN bus, LIN bus and

FlexRay signals all at the same time!

Analog waveforms (top) and digital waveforms (bottom) shown on PicoScope display

Digital channels connected to a device under test

A typical test set-up with four analogue probes (situated on the DUT using

the probe positioning system) and one TA369 MSO pod with eight digital

channels.

PQ201 bảng dữ liệu(PDF) 5 Page - Pico Technology Ltd.