STM32F101X4 datasheet(51/87 Pages) STMICROELECTRONICS

51 / 87 page

DocID15058 Rev 6

51/87

STM32F101x4, STM32F101x6

Electrical characteristics

5.3.11

Absolute maximum ratings (electrical sensitivity)

Based on three different tests (ESD, LU) using specific measurement methods, the device is

stressed in order to determine its performance in terms of electrical sensitivity.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts × (n+1) supply pins). This test

conforms to the JESD22-A114/C101 standard.

Static latch-up

Two complementary static tests are required on six parts to assess the latch-up

performance:

•

A supply overvoltage is applied to each power supply pin

•

A current injection is applied to each input, output and configurable I/O pin

These tests are compliant with EIA/JESD 78 IC latch-up standard.

5.3.12

I/O current injection characteristics

As a general rule, current injection to the I/O pins, due to external voltage below VSS or

above VDD (for standard, 3 V-capable I/O pins) should be avoided during normal product

operation. However, in order to give an indication of the robustness of the microcontroller in

cases when abnormal injection accidentally happens, susceptibility tests are performed on a

sample basis during device characterization.

Functional susceptibilty to I/O current injection

While a simple application is executed on the device, the device is stressed by injecting

current into the I/O pins programmed in floating input mode. While current is injected into

the I/O pin, one at a time, the device is checked for functional failures.

Table 30. ESD absolute maximum ratings

Symbol

Ratings

Conditions

Class

Maximum

value(1)

1. Based on characterization results, not tested in production.

Unit

VESD(HBM)

Electrostatic discharge

voltage (human body model)

TA = +25 °C

conforming to JESD22-A114

2000

VESD(CDM)

Electrostatic discharge

voltage (charge device model)

TA = +25 °C

conforming to

ANSI/ESD STM5.3.1

500

Table 31. Electrical sensitivities

Symbol

Parameter

Conditions

Class

Static latch-up class

TA = +85 °C conforming to JESD78A

II level A

STM32F101X4 bảng dữ liệu(PDF) 51 Page - STMicroelectronics

STM32F101X4 bảng dữ liệu(HTML) 51 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

bảng dữ liệu tải về

Link URL