| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
APM32E103RET6-R bảng dữ liệu(PDF) 51 Page - Geehy Semiconductor Co., Ltd. |
|
|
|||||||||||||||||||||||||||||
APM32E103RET6-R bảng dữ liệu(HTML) 51 Page - Geehy Semiconductor Co., Ltd. |
|
51 / 79 page ![]() www.g eeh y.co m Pag e 50 Table36 Output Drive Current Characteristics (test condition VDD=2.7~3.6V, TA=-40~105 ℃) Symbol Parameter Conditions Minimum value Maximum value Unit VOL Output low level voltage for an I/O pin when 8 pins are sunk at same time IIO = +8mA 2.7V<VDD<3.6V - 0.49 V VOH Output high level voltage for an I/O pin when 8 pins are sourced at same time VDD-0.4 - VOL Output low level voltage for an I/O pin when 8 pins are sunk at same time IIO = +20mA 2.7V<VDD<3.6V - 1.50 V VOH Output high level voltage for an I/O pin when 8 pins are sourced at same time VDD-1.2 - 5.9.2. NRST pin characteristics The NRST pin input drive adopts CMOS process, which is connected with a permanent pull-up resistor RPU. Table 37 NRST Pin Characteristics (test condition VDD=3.3V, TA=-40~105 ℃) Symbol Parameter Conditions Minimum value Typical value Maximum value Unit VIL(NRST) NRST low level input voltage - -0.5 - 0.8 V VIH(NRST) NRST high level input voltage - 2 - VDD+0.5 Vhys(NRST) NRST Schmitt trigger voltage hysteresis - - 200 - mV RPU Weak pull-up equivalent resistance VIN = VSS 30 40 50 kΩ Note: It is obtained from a comprehensive evaluation and is not tested in production. 5.10. Communication peripherals 5.10.1. I2C peripheral characteristics To achieve maximum frequency of I2C in standard mode, fPCLK1 must be greater than 2MHz. To achieve maximum frequency of I2C in fast mode, fPCLK1 must be greater than 4MHz. Table 38 I2C Interface Characteristics (TA=25 ℃, VDD=3.3V) Symbol Parameter Standard I2C Fast I2C Unit Min Max Min Max tw(SCLL) SCL clock low time 4.7 - 1.3 - μs tw(SCLH) SCL clock high time 4.0 - 0.6 - tsu(SDA) SDA setup time 250 - 100 - ns th(SDA) SDA data hold time - 3450 - 900 tr(SDA)/tr(SCL) SDA and SCL rise time - 1000 - 300 tf(SDA)/tf(SCL) SDA and SCL fall time - 300 - 300 th(STA) Start condition hold time 4.0 - 0.6 - μs |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |