© IGS Version V5

+44 (0)1635 294606 | info@i-led.co.uk | www.i-led.co.uk

Intelligent LED Solutions, Unit 2, Berkshire Business Centre,

Berkshire Drive, Thatcham, Berkshire, RG19 4EW

A division of Intelligent Group Solutions Ltd

9 of 11

ASSEMBLY INFORMATION

» The mounting of the PowerFlex DURIS E5 flexible has to be on a metal Heatsink.

» In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for the best contact

with the LED module. A thermal grease or heat transfer material is highly recommended.

IMPORTANT INFORMATION AND PRECAUTIONS

The PowerFlex LEDs, when powered up, are very bright.

Thus it is advised that you do not look directly at them. Turn

the PowerFlex product away from you and do not shine into

the eyes of others.

PowerFlex will overheat in operation if not attached to

a suitable Heatsink. Over heating can cause failure or

irreparable damage.

PowerFlex products, when operated, can reach high

temperatures, thus there is a risk of injury if they are

touched.

DO NOT HOT PLUG ON LED SIDE OF POWER SUPPLY

DO NOT TOUCH or PUSH on the LED as this might cause

irreparable damage.