AM62A7 datasheet(67/247 Pages) TI2

67 / 247 page

Table 5-48. Power Supply Signal Descriptions (continued)

SIGNAL NAME [1]

PIN TYPE [2]

DESCRIPTION [3]

AMB PIN [4]

ANF PIN [4]

VSS

PWR

Ground

A1, A10, A13,

A18, A22, A4,

A6, AA11,

AA14, AA2,

AA4, AA8,

AB1, AB12,

AB15, AB18,

AB22, AB3,

AB5, AB9, B3,

B5, B7, C4,

D11, D2, D20,

D4, E1, E3,

E5, F11, F13,

F16, F2, F4,

G12, G17, G3,

G5, G9, H1,

H11, H14,

H20, H4, J12,

J17, J3, K1,

K11, K4, K7,

K9, L12, L14,

L20, L3, M11,

M17, M4, M7,

N1, N10, N12,

N14, N16, N8,

P11, P13, P15,

P17, P20, P7,

R10, R12,

R14, R16, R2,

R4, R6, T1,

T15, T17, T3,

T5, T7, U12,

U14, U16, U2,

U4, U6, U9,

V1, V20, V3,

V5, V7, V9,

W11, W14,

W2, W4, W6,

W8, Y12, Y15,

Y3, Y5, Y9

A1, A10, A13,

A18, A22, A4,

A6, AA11,

AA14, AA2,

AA4, AA8,

AB1, AB12,

AB15, AB18,

AB22, AB3,

AB5, AB9, B3,

B5, B7, C4,

D11, D2, D20,

D4, E1, E3,

E5, F11, F13,

F16, F2, F4,

G12, G17, G3,

G5, G9, H1,

H11, H14,

H20, H4, J12,

J17, J3, K1,

K11, K4, K7,

K9, L12, L14,

L20, L3, M11,

M17, M4, M7,

N1, N10, N12,

N14, N16, N8,

P11, P13, P15,

P17, P20, P7,

R10, R12,

R14, R16, R2,

R4, R6, T1,

T15, T17, T3,

T5, T7, U12,

U14, U16, U2,

U4, U6, U9,

V1, V20, V3,

V5, V7, V9,

W11, W14,

W2, W4, W6,

W8, Y12, Y15,

Y3, Y5, Y9

(1)

This pin must always be connected via a 6.3V or greater, 0.8uF to 1.5μF capacitor to VSS if the respective VDDSHVx pin is ever

operated at 3.3V. The capacitor selected must provide a capacitance within the defined range after it has been derated for DC-bias,

operating temperature, and aging effects. There are three connection options if the respective VDDSHVx pin is only operated at 1.8V.

The pin can be connected to the same decoupling capacitor that is required for 3.3V operation, it can be left unconnected, or it can be

connected to the same 1.8V power source as the respective VDDSHVx pin.

5.3.20 Reserved

Table 5-49. Reserved Signal Descriptions

SIGNAL NAME [1]

PIN TYPE [2]

DESCRIPTION [3]

AMB PIN [4]

ANF PIN [4]

RSVD0

N/A