INTEGRATED CIRCUITS DIVISION

Specification: DS-CPC1966B-R05

©

Copyright 2025, Littelfuse, Inc.

OptoMOS® is a registered trademark of Littelfuse, Inc.

All rights reserved. Printed in USA.

11/18/2025

For additional information please visit our website at: www.ixysic.com

CPC1966B

6

IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes

to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits'

Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but

not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property

or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice.

MECHANICAL DIMENSIONS

CPC1966B

Dimensions

Unless Otherwise Noted

mm

(inches)

21.082 ± 0.381

(0.830 ± 0.015)

Pin 1

10.160 ± 0.254

(0.400 ± 0.010)

16.764 ± 0.381

(0.660 ± 0.015)

0.889 ± 0.127

(0.035 ± 0.005)

0.381 ± 0.025

(0.015 ± 0.001)

1.524 typ

(0.060)

0.762 ± 0.102

(0.030 ± 0.004)

5.080 ± 0.127

(0.200 ± 0.005)

7.622 ± 0.127

(0.300 ± 0.005)

5.080 ± 0.127

(0.200 ± 0.005)

1.016 ± 0.127

(0.040 ± 0.005)

1.651 ± 0.102

(0.065 ± 0.004)

Pin 8

3.302 ± 0.051

(0.130 ± 0.002)

0.127 ± 0.076

(0.005 ± 0.003)

5.080

(0.200)

7.622

(0.300)

15.90

(0.626)

2.00

(0.079)

0.95

(0.037)

5.080

(0.200)

Recommended PCB Pattern

Note: Pin-to-pin tolerances are non-cumulative.