LAN8808D-ISLASHKDX datasheet(55/80 Pages) MICROCHIP

55 / 80 page

LAN8808D

DS00005833C-page 55

6.0

OPERATIONAL CHARACTERISTICS

6.1

Absolute Maximum Ratings*

Supply Voltage (VDDAL_x, VDDCORE) (Note 6-1) ................................................................................ -0.5V to +1.27V

Supply Voltage (VDDAH_x, VDDIO, VDDIO_1) (Note 6-1) .................................................................... -0.5V to +3.63V

Input Voltage (all inputs) ......................................................................................................................... -0.5V to +3.63V

Output Voltage (all outputs) .................................................................................................................... -0.5V to +3.63V

Storage Temperature (TS).......................................................................................................................-55°C to +150°C

Lead Temperature (soldering, 10s) ....................................................................................................................... +260°C

Maximum Junction Temperature (TJ).................................................................................................................... +125°C

HBM ESD Performance .........................................................................................................................................+/-5 kV

Note 6-1

When powering this device from laboratory or system power supplies, it is important that the absolute

maximum ratings not be exceeded or device failure can result. Some power supplies exhibit voltage

spikes on their outputs when AC power is switched on or off. In addition, voltage transients on the

AC power line may appear on the DC output. If this possibility exists, it is suggested that a clamp

circuit be used.

*Stresses exceeding those listed in this section could cause permanent damage to the device. This is a stress rating

only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Functional

operation of the device at any condition exceeding those indicated in Section 6.2, "Operating Conditions**", Section 6.5,

"DC Specifications", or any other applicable section of this specification is not implied.

6.2

Operating Conditions**

Supply Voltage (VDDAL_x, VDDCORE) ............................................................................ (-5%/+5%) +1.15V to +1.27V

Supply Voltage (VDDAH_x @ 2.5V)............................................................................... (-5%/+5%) +2.375V to +2.625V

Supply Voltage (VDDIO, VDDIO_1 @ 3.3V) .................................................................. (-5%/+5%) +3.135V to +3.465V

Supply Voltage (VDDIO, VDDIO_1 @ 2.5V) .................................................................. (-5%/+5%) +2.375V to +2.625V

Supply Voltage (VDDIO, VDDIO_1 @ 1.8V) ...................................................................... (-5%/+5%) +1.71V to +1.89V

Input Voltage (all inputs) ......................................................................................................................... -0.3V to +3.63V

Output Voltage (all outputs) .................................................................................................................... -0.3V to +3.63V

Ambient Operating Temperature in Still Air (TA).................................................................................................. Note 6-2

Note 6-2

C to +70C for commercial version, -40C to +85C for industrial version.

**Proper operation of the device is guaranteed only within the ranges specified in this section.

LAN8808D-I/KDX bảng dữ liệu(PDF) 55 Page - Microchip Technology

LAN8808D-I/KDX bảng dữ liệu(HTML) 55 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

bảng dữ liệu tải về

Link URL