DS601-2

11

©2003 Reg. No. 227 4001, ENGLAND

Page 7

Low-Power-Radio Transceiver IC

RF600T

Application Circuit

The circuit shown below is for a typical RF600T application. A 9 way ‘D’ connector provides an RS232

termination to the host system and the RXQ1 hybrid contains all of the circuitry required to implement the

RF path. In many applications it will be possible to dispense with the option links and hard-wire the options

to the desired settings. Note however that the host and RF baud options and loop option must be set using

resistors as described above.

RF600T Application Circuit with RXQ1 Transceiver and RS232 Interface.