SoftZorb MCS Data Sheet

Soft Version of EccoSorb MCS Absorders

SZorb-MCS-0120

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird

Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any

kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2019 Laird Technologies, Inc. All Rights Reserved. Laird, Laird

Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license

under any Laird Technologies or any third-party intellectual property rights.

2

0

20

40

60

80

100

120

140

160

180

200

0

5

10

15

20

25

30

35

40

Frequency, GHz

Attenuation, SoftZorb MCS

0

5

10

15

20

25

30

35

40

45

0

10

20

30

40

50

60

70

80

90

100

Pressure (psi)

SoftZorb MCS Typical Deflection

Average

APPLICATIONS

 This softer material offers lower deflection for use in cavities whenever a lid may potential

contact with and compress the absorber causing possible damage to other components.

In addition, Softzorb MCS’ ability to more thoroughly fill the cavity greatly increases

absorber performance by limiting leakage around the absorber

 Can be used in commercial Datacom equipment such as optical transceiver

cavities where space is at a premium and superior absorbing capabilities are required.

AVAILABILITY

 Standard sheets are 305 x 305mm (12”x12”).

 Standard thicknesses are 0.5mm (0.020”),1.0mm (0.040”),1.5mm (0.060”) , 22 mm

(0.08”), 2.54mm (0.100”) and 3 mm (0.12”)

 Available in other thicknesses, sizes, and customer specified shapes upon request.

USA: +1.866.928.8181

Europe: +49.8031.24600

Asia: +86.755.2714.1166

www.laird.com