L6280 datasheet(19/26 Pages) STMICROELECTRONICS

tên linh kiện	L6280

Giải thích chi tiết về linh kiện	THREE CHANNELS MULTIPOWER DRIVER SYSTEM

PDF	26 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

19 / 26 page

Ratings of 35V:a max value of 33V is reccom-

mended.

In this case, at each couple of outputs for the bi-

polar windings, a snubber network must be con-

nected. This network is done by the series of a re-

sistor and of one capacitor:

Rsnub =VS max/Imotor peak;

Csnub = Imotor peak/ (dv/dt)

One dv/dt of 200V/

µsec is generally a correct

choice.

Of course, care must be taken in the Printed Cir-

cuit Board design regarding the ground paths and

the high current loops.

An example of P.C.B. layout is shown in Figure

29ab; Figure 30 shows the Schematic Diagram of

the circuit of the L6280 S.P.D. S.AB.

The driving signals useful for this board can be

easily generated by using an additional board

(EMU KIT 512) not described here.

On Figure 29a it can be observed the copper area

near the I.C. is used to sink out the heat from the

device. Useful thermal characteristics of the

L6280 are shown in Figure 31 and 32.

Figure 24: Application Test Circuit of the L6280

L6280

19/26

L6280 bảng dữ liệu(PDF) 19 Page - STMicroelectronics