công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

SL23EP05SC-1HT bảng dữ liệu(PDF) 8 Page - SpectraLinear Inc

tên linh kiện SL23EP05SC-1HT
Giải thích chi tiết về linh kiện  Low Jitter and Skew 10 to 220MHz Zero Delay Buffer (ZDB)
PDF  11 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  SPECTRALINEAR [SpectraLinear Inc]
Trang chủ  http://www.spectralinear.com
Logo SPECTRALINEAR - SpectraLinear Inc

SL23EP05SC-1HT bảng dữ liệu(HTML) 8 Page - SpectraLinear Inc

Back Button SL23EP05SC-1HT Datasheet HTML 3Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 4Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 5Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 6Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 7Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 8Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 9Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 10Page - SpectraLinear Inc SL23EP05SC-1HT Datasheet HTML 11Page - SpectraLinear Inc  
Zoom Inzoom in Zoom Outzoom out
 8 / 11 page
background image
Rev 1.0, May 21, 2007
Page 8 of 11
SL23EP05
External Components & Design Considerations
Typical Application Schematic
Comments and Recommendations
Decoupling Capacitor: A decoupling capacitor of 0.1 F must be used between VDD and VSS on the pins 6 and 4. Place the
capacitor on the component side of the PCB as close to the VDD pin as possible. The PCB trace to the VDD pin and to the
GND via should be kept as short as possible. Do not use vias between the decoupling capacitor and the VDD pin.
Series Termination Resistor: A series termination resistor is recommended if the distance between the output (SSCLK) and
the load is over 1 ½ inch. The nominal impedance of the SSCLK output is about 30
. Use 20
resistor in series with the
output to terminate 50
trace impedance and place 20
resistor as close to the clock outputs as possible.
Zero Delay and Skew Control: All outputs and CLKIN pins should be loaded with the same load to achieve “Zero Delay”
between the CLKIN and the outputs. The CLKOUT pin is connected to CLKIN internally on-chip for internal feedback to PLL,
and sees an additional 2 pF load with respect to the clock pins. For applications requiring zero input/output delay, the load at
the all output pins including the CLKOUT pin must be the same. If any delay adjustment is required, the capacitance at the
CLKOUT pin could be increased or decreased to increase or decrease the delay between clocks and CLKIN.
For minimum pin-to-pin skew, the external load at the clocks must be the same.



Html Pages

1 2 3 4 5 6 7 8 9 10 11


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com