StripmaSter® Wire StripperS

Short stop-latch protects wire strands by

limiting the stripping stroke to 5/32 in. and

retains the slug until the wire is ready

for terminating.

Transparent wire stop provides

uniform stripping length.

Gripper pads are available in your choice of

either parallel, file or grit-type. File-type pads

may be used on hard-to-grip insulations.

Replacement Frame Assemblies

Optional Accessories

For Custom Stripmaster® and Custom Steel Stripmaster® Wire

Strippers

Surface

Type

Gripper Set*

Cat. No.

Movable Gripper

Cat. No.

Stationary Gripper

(Thickness)

Grit**

LB-197

L-5212

L-5215 (.129 in.)

Grit**

LB-198

L-5212

L-5217 (.156 in.)

File

LB-721

LB-718

LB-719 (.129 in.)

File

LB-722‡

LB-718

LB-720 (.156 in.)

Parallel

LB-730

LB-727

LB-728 (.129 in.)

Parallel

LB-731

LB-727

LB-729 (.156 in.)

For Custom Stripmaster® Lite Wire Strippers

Surface

Type

Gripper Set*

Cat. No.

Movable Gripper

Cat. No.

Stationary Gripper

(Thickness)

Grit*

LB-1188

LB-882

LB-883 (.109 in.)

File

LB-1189

LB-1184

LB-1185 (.109 in.)

Parallel

LB-1190

LB-1186

LB-1187 (.109 in.)

* Gripper Set includes one movable gripper, one stationary gripper.

** Grit pads are standard for most Custom Stripmaster® and Custom

Stripmaster® Lite products.

‡ These are for use on hard-to-grip surfaces.

Gripper pad selection depends on insulation type and user preference.

Note: For 10-14 AWG, use .129 in. stationary gripper. For 16-30 AWG, use .156

in. gripper.

Replacement Gripper Pads

Short Stop-Latch

Cat. No.

For Custom & Custom Steel Stripmaster® Wire Strippers

L-5269

For Custom Stripmaster® Lite Wire Strippers

LB-1194

Transparent Adjustable Wire Stop Assembly

Cat. No.

For Custom & Custom Steel Stripmaster® Wire Strippers

L-5270

For Custom Stripmaster® Lite Wire Strippers

LB-1195

For Custom Steel Stripmaster® Wire Strippers

Cat. No.

Frame only, 10-14 AWG

LB-1091

Frame only, 16-30 AWG

LB-1092

Frame only, 10-14 AWG, internal spring (see note)

LB-1090

Frame only, 16-30 AWG, internal spring (see note)

LB-1089

Note: Frames with internal springs allow additional blade penetration pressure

for difficult and multi-layered insulation types.

For Custom Stripmaster® Lite Wire Strippers

Cat. No.

Frame only

LB-895

Frame only, Wire Stop and Latch

LB-896

For Custom Stripmaster® Wire Strippers

Cat. No.

Frame only, 10-14 AWG

L-5616

Frame only, 16-30 AWG

L-5617

Frame only, 10-14 AWG, Wire Stop and Latch

L-5618

Frame only, 16-30 AWG, Wire Stop and Latch

L-5619

Frame only, 10-14 AWG, internal spring (see note)

L-9039

Frame only, 16-30 AWG, internal spring (see note)

L-9038

Note: Frames with internal springs allow additional blade penetration pressure for

difficult and multi-layered insulation types.

.156

Stationary Gripper for

Black Handle Units

For 16 thru 30 AWG wire.

Stationary Gripper for Red

Handle Units

For 10, 12 & 14 AWG Wire

L-5215

.129

L-5217

StripmaSter® Wire StripperS